Free shipping over $47.98

      FAQs

      Balloons User Manual

      Step 1 - Connect

      Connect the Balloons to the Tubes based on your desired design, color combination, and arrangment.

      Step 2 - Create

      Create the construction of your choice using the Connectors and Tubes to form either a Traditional Arch, Square Arch, 2 Columns or 2 Garlands.

      Step 3 - Inflate

      Insert the Plug into one end of the fill coupler, attach the electric pump to the other end, flip the switch, and watch your Balloons inflate and self-seal in ONE MINUTE!

      How long does it take to build a Balloon Arch.

      On average, 10-15 minutes depending on the design and creator and 1 minute to inflate balloons.

      How many Balloons come in a package and are needed for each design?

      Each Package comes with 22 one-time use Balloons and each Tube holds 20 WD Balloons.

      • Traditional Arch needs 124 WD Balloons
      • Square Arch needs 126 WD Balloons
      • Column needs 40 WD Balloons per column
      • Garland needs 63 WD Balloons per garland

      How many WD Balloon Packages are needed for each design?

      • Traditional Arch = 6 WD Balloon Packages
      • Square Arch = 6 WD Balloon Packages
      • Column = 2 WD Balloon Packages per column (2 columns per kit)
      • Garland = 3 WD Balloon Packages per garland (2 garlands per kit)
      *Some Designs may require additional EZ Balloon Packs to achieve your desired look.

      What if an WD Balloon deflates, does not inflate or is not the same size of the other balloons?

      Simply remove the Balloon from the Tube, follow the instructions on how to inflate using the Electric Air Pump and adaptor and insert back into the Tube.

      What if a balloon pops while inflating, does the arch still work?

      Yes, the arch will still work. Simply take an extra Balloon from the package, inflate using the Electric Pump and connect to the same location.

      When do you turn off the Pump?

      All the balloons are 12" and it is recommended to not exceed 11" in diameter. Once the balloons appear full in size, turn off the Pump and disconnect from the fill coupler and outlet.

      Is the arch sturdy for outdoor use?

      It is recommended to use weighted sand or water bags for extra security.

      How do you deflate the Balloons after use?

      They do not deflate. Simply pop the Balloons and discard.

      Help Center

      Service Center

      © 2026 kenwoodi

      Cart

      loading